Media Summary: Can we get this 1966 Ford Ltd up and running part 2 (high hopes) First off, HAPPY NEW YEAR! Repaired and cleaned the heater box. Installed the heater core, and blower fan. Replaced the front ... Cleaned up the radio and got my paint for the gauge needles, so all that stuff got a couple coats of fresh paint. Came out nice, with ...
1966 Ford Ltd Restoring - Detailed Analysis & Overview
Can we get this 1966 Ford Ltd up and running part 2 (high hopes) First off, HAPPY NEW YEAR! Repaired and cleaned the heater box. Installed the heater core, and blower fan. Replaced the front ... Cleaned up the radio and got my paint for the gauge needles, so all that stuff got a couple coats of fresh paint. Came out nice, with ... This video was uploaded from an Android phone. Got the dashboard reinstalled. It was a bit of a pain assembled, because it became heavy in a awkward way. Then I had to remove ... Instagram I put a deposit down to get the needed stuff ordered for a new convertible ...
This may very well be the last "numbered" Instagram Spent the past few days getting the fasteners for the top cleaned up an ... I thought changing the top cylinders would be a quick job.... well five hours later, there on. One of the cylinder nylon spacers fell ... Cleaned up some of the engine parts. Took the A/C unit out. I hooked up the battery to see what worked and what didn't. Been doing a little work here and there on the I repaired the rust in the lip of the trunk lid. Sanded the underside out. After a little sanding of the filler, it will be ready for paint.
Got the steering gear off. I hope to get the parts in the next week or so for it. Going to try to spend some time removing all the stuff ... Started removing all the small stuff out of the engine compartment. The more I dissemble, the nicer it will look finished. I will bead ... I looked over the seats and decided I can reupholster them myself. I stripped the rear seat down the the springs in short order.
